Old Windows Replaced Without the Wait
Window installation in Bardstown for homes with worn single-pane units and deteriorated frames
A significant share of Bardstown's older housing stock was built with single-pane aluminum or wood-framed windows that are now decades past their functional lifespan—units that fog between panes, stick in their tracks, and no longer seal at the sash. All & All Construction & Dumpsters LLC installs replacement windows in Bardstown using an in-house crew that measures, orders, and installs without relying on outside contractors at any point. That direct sequence means the job gets scheduled and completed on one timeline rather than waiting on a second trade to show up after the windows arrive.
Windows are measured first, then ordered, with delivery typically running about two weeks from the order date. When the units arrive, the crew removes the existing windows, inspects each frame and sill for rot before the new unit goes in, and installs the new windows with interior and exterior trim finished in the same visit. That sill and frame check is not cosmetic—on older Bardstown homes, particularly those with wood-frame construction from the mid-twentieth century, exterior moisture often works into the rough opening over years of seal failure, and installing a new window over a rotted sill leads to the same leak pattern repeating. Addressing that rot before the new unit is set is what makes the replacement last.
Schedule a measuring appointment so window specifications can be confirmed and the order placed with accurate dimensions before the installation date is set.
What Proper Window Replacement Requires
Replacement window installation involves more than swapping one unit for another. The rough opening has to be confirmed square and plumb before the new window is set, because a window installed in an out-of-square opening will not seal properly at the frame and will bind in operation within a short time. On homes built in the 1950s through 1970s—a common construction era in Nelson County—settling has often racked door and window openings slightly, and the installer has to shim and pack the opening to correct for that before the new unit is fastened in place.
After installation, new windows operate smoothly on their hardware, lock fully at the sash, and show a consistent reveal between the sash and frame on all sides. Exterior trim is reinstalled and sealed at the edges so water cannot track behind the casing. For a full house, All & All Construction & Dumpsters LLC typically completes every unit in a single day, which means the home is not left with open rough openings overnight at any point during the job.
The one-year workmanship warranty covers the installation itself—the framing repair, shimming, trim, and seal work—separately from any manufacturer warranty that comes with the window unit. Both apply once the job is complete, and understanding which covers which type of issue matters if something needs attention after installation.
Answers About How the Work Is Done
These questions address the sequence of window replacement work, what gets inspected before new units are installed, and what owners should look for once the job is finished.
What happens to the existing frame before the new window is installed?
The crew removes the old unit and inspects the sill, jambs, and rough opening for rot, moisture damage, or structural movement—any deteriorated wood is replaced before the new window is set, because a new unit installed over compromised framing will not seal or operate correctly over time.
How is an out-of-square opening corrected during installation?
Shims are placed at the sill and jamb locations to bring the opening back to square and level before the window is fastened, and the gap between the window frame and rough framing is filled with low-expansion foam or backer rod and sealant to prevent air infiltration at the perimeter.
Why does measuring accuracy matter so much for replacement windows?
Replacement windows are built to the specified dimensions and cannot be adjusted in the field once manufactured—a window ordered even a quarter-inch too wide will not fit the opening, which is why measurements are taken at multiple points across the width and height of each existing frame before the order is placed.
What should the finished installation look like on the interior and exterior?
On the interior, the reveal between the sash and the frame should be even on all four sides, and the lock hardware should engage without forcing; on the exterior, the casing should sit flat against the siding with no visible gaps at the edges, and the head flashing should overlap the casing rather than tuck beneath it.
How do older Bardstown homes with wood-framed construction typically present during window replacement?
Wood-frame homes from the mid-twentieth century often show sill rot at the base of the rough opening, particularly on north and west exposures where moisture accumulates longest, and the exterior trim on these homes was frequently installed without a back-primed edge, which accelerates paint failure and water intrusion at exactly the point the new window will be sealed against.
All & All Construction & Dumpsters LLC also installs windows in Bloomfield, New Hope, Fairfield, Springfield, and Shepherdsville. To get accurate measurements taken and a free estimate prepared for your home, call (502) 510-4288.